Shelving Sides
Made of sectional steel, they have slots to a 50 mm pitch on both sides.

The two uprights are connected to each other by two horizontal cross bars and a cross piece, forming a sturdy side wall. The sides are equipped with steel plates for floor fixing.

Side, Middle and Rear Wall Panels
The side and rear walls are fixed with screws to the structure and, when used together, can form enclosed compartments. In addition, the rear walls do not require the fitting of any cross pieces.

Sliding Doors
They are made of sheet steel specially shaped to improve solidity.

Doors are used to protect the shelved goods from impacts and dust. Each pair of sliding doors covers two shelving span lengths and has a cylinder lock with two keys.

Shelves
For safety purposes, each extensible shelf must be opened individually. The device consists of a rod to be installed on the side wall
(one for each span) with a hook to be applied to each extensible shelf. Opening only one shelf at a time avoids dangerous shifting of unsecured heavy loads, which might overturn the structure.

A hook located on the front of the side walls allows the shelf to be locked in the opening and closing phases. In the opening phase, locking the shelf allows any material to be taken in complete safety.

Floor Support Plate
The support plate is designed to distribute the pressure applied on the floor by the side wall. A technical data sheet supplied by FAMI is useful to check the suitability of the floor intended for racking system installation. The support plate is provided with a hole for plate anchoring to the floor by means of standard anchor bolts. This operation is necessary to ensure shelf safety.