The F AR shelving system, thanks to its extensible shelves, is especially suitable for storing very heavy material (moulds, engines etc.), which can be handled in complete safety by using an overhead crane and a lift truck. The shelves can have plain or telescopic extension, and a capacity ranging between 800 and 1000 kg.

SYSTEM ST

SIZE & CONFIGURATION

Telescopic Extensions Shelves
Rack depth: 900mm / 1100mm / 1300mm
Working span length: 850mm / 1050mm / 1250mm
Extensibility: 770mm / 970mm / 1170mm
Side width: 100mm
Rack height: 1510mm / 2010mm / 2210mm / 2510mm / 3010mm
Top shelf: 50mm
Adjustable pitch: 50mm
Extensibile shelves: 107mm
Minimum height from floor: 285mm
Minimum distance between shelves: 300mm
Minimum span between shelves: 190mm
Plate for side panel: 120mm
Minimum distance from upper shelf: 50mm
Slide height: 80mm
Slide width: 100mm
Footprint: 60mm
Upright sheet metal thickness: 3mm

Plain Extension Shelves
Rack depth: 900mm / 1100mm / 1300mm
Working span length: 1250mm
Extensibility: 600mm / 750mm / 900mm
Side width: 100mm
Rack height: 1510mm / 2010mm / 2210mm / 2510mm / 3010mm
Top shelf: 50mm
Adjustable pitch: 50mm
Extensibile shelves: 58mm
Minimum height from floor: 185mm
Minimum distance between shelves: 300mm
Minimum span between shelves: 225mm
Plate for side panel: 120mm
Minimum distance from upper shelf: 175mm
Footprint: 60mm
Upright sheet metal thickness: 3mm

SPEC

Shelving Sides
Made of sectional steel, they have slots to a 50 mm pitch on both sides.
The two uprights are connected to each other by two horizontal cross bars and a cross piece, forming a sturdy side wall. The sides are equipped with steel plates for floor fixing.

Side, Middle and Rear Wall Panels
The side and rear walls are fixed with screws to the structure and, when used together, can form enclosed compartments. In addition, the rear walls do not require the fitting of any cross pieces.

Sliding Doors
They are made of sheet steel specially shaped to improve solidity.
Doors are used to protect the shelved goods from impacts and dust. Each pair of sliding doors covers two shelving span lengths and has a cylinder lock with two keys.

Shelves
For safety purposes, each extensible shelf must be opened individually. The device consists of a rod to be installed on the side wall
(one for each span) with a hook to be applied to each extensible shelf. Opening only one shelf at a time avoids dangerous shifting of unsecured heavy loads, which might overturn the structure.

A hook located on the front of the side walls allows the shelf to be locked in the opening and closing phases. In the opening phase, locking the shelf allows any material to be taken in complete safety.

Floor Support Plate
The support plate is designed to distribute the pressure applied on the floor by the side wall. A technical data sheet supplied by FAMI is useful to check the suitability of the floor intended for racking system installation. The support plate is provided with a hole for plate anchoring to the floor by means of standard anchor bolts. This operation is necessary to ensure shelf safety.

METAL COLOURS

GREY RAL 700 .01

GREEN RAL 6011 .02

BLUE RAL 5012 .04